6 X 8 Slim Palm Box

$255.00
Shop

8 X 10 Slim Palm Box

$267.00
Shop

6 X 8 Deep Palm Box

$272.00
Shop

8 X 10 Deep Palm Box

$285.00
Shop

Optional Tripod Fitting for Palm Box

$18.00
Shop

Palm Box Tray

$38.00
Shop

Add "D" Rings to Palm Box

$12.00
Shop

6 x 8 Extra Palm Box Palette

$23.00
Shop

8 x 10 Extra Palm Box Palette

$25.00
Shop
Picture
OPTIONAL BRASS TRAY STORES INTO THE LID OF THE PALM BOX.

FEATURES COMMON TO ALL PALM BOXES

All Palm Boxes can be used while sitting flat on the top of a table.

Each Palm Box has storage for one 1/8" thick panel below the palette.  One additional panel can store within the panel holder (lid) of the box.  This means that the artist is able to close the lid of the box without removing their "work in progress".

Palm Box palettes are recessed 11/16”, allowing the artist to leave palette colors in place while storing a panel in the panel holding lid for transport.

The access cutout in the lid of the box has a brass cover that can be easily removed.  Pencils, brushes, etc. can be stored here. The space was there so we have allowed use of it.  We understand that even small spaces are of value.

The access cutout in the lid will also accept our optional Palm Box Tray (see above photo).

The Optional Tripod Fitting is made in our workshop and accepts most camera tripod ball heads (1/4” by 20 thread count).  It will mount on the back of the Palm Box and can be easily removed (see below photo).

The Palm Box side support arm is made from solid brass and will adjust from 90 degrees to completely flat.  The side support arm allows for true stability of the panel holding lid while working.  Unlike "torque" or "friction" hinges, the adjustable side support arm will not move once it is engaged.

The handmade leather strap is standard on all Palm Boxes and can be used as a carry strap or a means of supporting the box comfortably while painting.

The Palm Box palettes are removable, so they are also replaceable at a very low cost.


specifications

6 x 8 Slim Palm Box
  • Designed for 6" x 8" (1/8" thick) panels
  • Overall Dimensions:  9 1/2" x 7" x 2 3/8" deep
  • Approximate Weight:  1.75 lb
  • Panel Storage:  TWO 1/8" thick panels
  • Void Inside Lid:  5/8" deep
  • Storage Below Palette:  none
  • Palette Size:  8 1/2" x 6"
  • Palette Depth:  11/16"
6 x 8 Deep Palm Box
  • Designed for 6" x 8" (1/8" thick) panels
  • Overall Dimensions:  9 1/2" x 7" x 3 5/8" deep
  • Approximate Weight:  2.5 lb
  • Panel Storage:  TWO 1/8" thick panels
  • Void Inside Lid:  5/8" deep
  • Storage Below Palette:  1 1/4"
  • Palette Size:  8 1/2" x 6"
  • Palette Depth:  11/16"
8 x 10 Slim Palm Box
  • Designed for 8" x 10" (1/8" thick) panels
  • Overall Dimensions:  11 1/2" x 9" x 2 3/8" deep
  • Approximate Weight:  2.5 lb
  • Panel Storage:  TWO 1/8" thick panels
  • Void Inside Lid:  5/8" deep
  • Storage Below Palette:  none
  • Palette Size:  10 1/2" x 8"
  • Palette Depth:  11/16"
8 x 10 Deep Palm Box
  • Designed for 8" x 10" (1/8" thick) panels
  • Overall Dimensions:  11 1/2" x 9" x 3 5/8" deep
  • Approximate Weight:  3.25 lb
  • Panel Storage:  TWO 1/8" thick panels
  • Void Inside Lid:  5/8" deep
  • Storage Below Palette:  1 1/4"
  • Palette Size:  10 1/2" x 8"
  • Palette Depth:  11/16"

PALM BOX SIDE ARM INSTRUCTIONS

1. Locate the notch that is on the bottom bar.
2. Locate the wingnut that is on the rear of the right side of the box.
3. Loosen ALL of the wingnuts.
4. Open the lid of the box to about 110 degrees. You will have to hold the lid open slightly further than 90 degrees so that you will be able to push the arm all of the way through toward the back.
5. With one hand holding the lid of the box and another hand on the front wing nut, push the front facing wingnut toward the rear of the box. The object is to get the notch on the bottom brass bar (mentioned in step 1.) to sit onto the screw that is associated with the wingnut (mentioned in step 2.).
6. Snug the wingnuts to keep the lid at the desired angle.